Selas Multiflo™ Mixer Selas Multiflo Mixers (Product No. 2331, 2332) are patented design adjustable high efficiency proportional mixers. Selas Multiflo Mixers are patented design adjustable high efficiency proportional mixers. The energy of the air passing through the jet produces a suction to entrain a combustible gas and deliver the mixture to the burners. The patented Air Adjuster provides wide capacity ranges in the same size mixer. A simple hand adjustment changes the air capacity and matches the mixer to the burners. The Multiflo Mixer uses a Zero Regulator (See Bulletin 5101) to regulate the gas flow in correct ratio to air flow. A butterfly air valve (see Section 1) in the air lines is used to vary air flow and heat output of the mixer. This valve maybe operated by automatic control devices. Features and Benefits Patented Air Adjuster matches any burner area within its range – over 2.5 to 1 change. Individual burner adjustments on common mixer now possible. Optimum shape factors in air jet and entraining throat are fixed – no jets, sleeves, rods, etc., to change. Compact, rugged, heavy-duty construction. Constant high entrainment efficiency in all ranges. Axial adjustment of air tube balances the mixture pressure to the burners. Air to gas ratio easily set and held. Single valve control of heat input. read more

Our product, FLAMMER End of Line Flame Deflagration installed for an Oil and Gas Platform.  The below described End of line deflagration flame arrester at the end of vent pipes prevents light-back at deflagration of potentially explosive vapour-air, and or gas-air mixtures from outside (atmospheric conditions) to the protected side (e. g. storage tank). Type : 1008-0004-82 Nominal connection pipe size DN : ≤ DN2'' Flange connection : ANSI B16.5 150lb RF Explosion group : IIA1,IIA,IIB1,IIB2,IIB3,IIB Approval standard : EN ISO 16852 ATEX- No./ Type : IBExU 09 ATEX 2022X / DEF Please contact us for more details! read more

Single-stage solenoid valve, normally when closed, fast opening, fast closing. read more

read more

Spring-loaded pressure regulator with adjustable setpoint spring. Internal tap of regulator output pressure. External pulse connections optional, suitable for controlling regulator output pressure. read more

MVD 205/5 - Single-stage solenoid valve, normally when closed, fast opening, fast closing, manual limitation of flowing gas volume by adjusting main volume. Technical description The DUNGS safety solenoid valve MV/4, MVD, MVD/5, MVDLE/5 is a single-stage automatic shut-off valve as per EN 161 for gas burners and gas appliance. - Max. operating pressure up to 200, 360 or 500 mbar (20, 36 or 50 kPa) - normally closed - MV, MVD: fast opening - MVDLE: Slow opening with adjustable fast stroke for start gas volume - Main volume adjustable (MVD/MVDLE) - DC solenoid, rectifier wiring with radio interference suppression in terminal box with PG screw union - Mountable closed position signal contact to monitor closed position of valve (.../5) - Pipe thread as per ISO 7/1 - Flange connection as per DIN EN 1092-1 - Reliable function, rugged and maintenance-free - On request, design without non-ferrous metals Application The solenoid valve is used for securing, limiting, shutting off and releasing gas supply to gas burners and gas appliances. MV/4 Range of application: for large breaking capacities, e.g. pulsed firing. The DUNGS safety solenoid valve MV... is suitable for gases of families 1, 2, 3 and other neutral gaseous media. read more

Technical description The DUNGS double solenoid valve DMV integrates two solenoid valves in one compact fitting. - Automatic shut-off valves as per DIN EN 161 Class A Group 2. - Two A valves in one housing - Double seat valves - High flow rates - Max. operating pressure up to 0.5 bar (50 kPa) - Fast closing - Fast opening (DMV/11 eco, DMV-D/11 eco) - Adjustable main volume (DMV-D/11 eco, DMV-DLE/11 eco) - DC solenoid - Low electric power consumption through power switching - Mountable closed position signal contact - Compact, light-weight Application Double solenoid valves are used where two single valves were mounted previously. In connection with DUNGS gas regulators and additional components, a wide variety of regulating tasks can be performed. It does not contain any non-ferrous metals, suitable for gases of up to max. 0.1 vol.% H2S, dry. Suitable for gases of families 1, 2, 3 and other neutral gaseous media. Approvals EC type testing certificate as per: •EC-Gas Appliances Regulation •EC-Pressure Equipment Directive Approvals in other important gas consuming countries. read more

Dungs gas components parts arrived our store. Gas Turbine Meter, DMV 5065/11 eco, Pressure Regulator FRS 515,  Single Solenoid Valve MVD205/5, MV502, PCB Board for DMV, Pressure switches.  We welcome enquiries. Kindly contact us for more information. read more