read more

SQM48.697B9 - Actuator, 35Nm, 90°/60s, CAN bus, shaft 14mm+key, holding torque 35Nm read more

Two single stage solenoid valves, de-energised in absence of current, fast-opening, fast-closing. Manual limitation of gas flow is possible with main load adjustment (D) at valve 1 (V1) Connection: DN80 Max operating pressure: 500 mbar Electrical rating: 50 - 60 Hz, 230 V AC Enclosure rating: IP54 read more

220 in lb Output; 90 deg Electrical ratings: 120 Vac, 60 Hz Enclosure rating: NEMA Type 4 Auxiliary Switch: SPDT; 6A @ 120 Vac Ambient temperature rating: -40°F to +136 °F (-40 °C to +58 °C) Operating mode: Proportioning, 4-20 mA Input Size: 6 5/8” x 5 3/8” x 7” (L x W x H) 1/2” Shaft Crank arm included; Capable of 180 degree rotation with 180 degree slide wire read more

Single-stage automatic shutoff valve, fast opening, fast closing. Adjustable max flow. Incorporates proof of closure. Size : 3/4'' NPT Max Operating pressure : 700 mbar Electrical Rating 120 VAC @ 50-60 Hz   read more

read more

The differential pressure switches LGW…A2… are adjustable differential pressure switchesas per EN 1854 for  automatic burner controls. Suitable for switching a circuit on, off or over on changes in actual pressure value relative to the set reference value. The reference value (switching point) is adjusted on a setting wheel provided with a scale. LGW 3 A2 - 0,4 - 3 mbar LGW 10 A2 -1 - 10 mbar LGW 50 A2 -2,5 - 50 mbar LGW 150 A2 - 30 - 150 mbar read more

Valve testing system VPS 504 for multiple actuators Valve proving system for automatic shutoff valves as per EN 161, Class A and Class B The VPS 504 may be used with any other valve whose tightness in counter-flow direction excludes by construction a leakage in flow direction. The VPS 504 is suitable for all DUNGS valves according to EN 161 Classes A and B. read more

Differential pressure switch for air, flue and exhaust gases The differential pressure switches LGW…A2… are adjustable differential pressure switchesas per EN 1854 for utomatic burner controls. Suitable for switching a circuit on, off or over on changes in actual pressure value relative to the set reference value. The reference value (switching point) is adjusted on a setting wheel provided with a scale. EC type testing certificate as per: • EC-Gas Appliances Regulation • EC-Pressure Equipment Directive LGW…A2P test button The LGW...A2P differential pressure switch is equipped with a test button. The test button permits a service-friendly check of the safety function. If the test key is pressed while the pressure exists, the connection to the pressure connection G 1/4 is interrupted and the pressure under the diaphragm is released. The microswitch of the pressure switch changes the contact position from NO to NC. If the test button is released, the pressure below the diaphragms is built up again and the microswitch changes to its original position LGW 3 A2P - 0,4 - 3 mbar LGW 10 A2P -1 - 10 mbar LGW 50 A2P -2,5 - 50 mbar LGW 150 A2P - 30 - 150 mbar           read more

read more