Valve testing system VPS 504 for multiple actuators Valve proving system for automatic shutoff valves as per EN 161, Class A and Class B The VPS 504 may be used with any other valve whose tightness in counter-flow direction excludes by construction a leakage in flow direction. The VPS 504 is suitable for all DUNGS valves according to EN 161 Classes A and B. The VPS 504 is the valve proving system for DUNGS multiple actuators. The valve proving system complies with EN 1643: - Equipment operates independent of residual pressure in the range of the permissible operating range. - Test volume ≤ 4 l - Setting work not necessary on site - Short test period: ≈ 10 s, max. 36 s - Tightness or leaks are displayed by an LED - External fault display possible for series 02, series 04 and S05 - Group fault alarm optional for S01 (SSM) - Suitable for TRD systems - Electrical connection possible by plug connection S01, 02, 03. No rewiring is required for contact allocation as per DIN 4791. - S04 and S05: electrical connection at screw terminals via PG 13.5 cable entry read more

Replacement part for Honeywell Maxon OvenPak Burner read more

Automatic gas solenoid valves are used for safety and control of gas for shut-off in gas feed pipes. Suitable for various gasses, including Natural gas, Propane and LPG Gas solenoid valve normally closed solenoid that open automatically when the coil is  powered and close automatically when there is no tension. Size ranging from 1-1/4'' to 2''. Test point 5 connections ,Screw ¼” Supply voltage 230V (-15%+10%) 50-60Hz , 110V (-15%+10%) 50-60Hz ,24Vdc (-15%+10%) 50-60Hz Approval EN161 / PED / EAC Complete Body Die – Cast Aluminium Gd – AlSi12Cu - EN AB 46100 read more

Automatic gas solenoid valves are used for safety and control of gas for shut-off in gas feed pipes. Suitable for various gasses, including Natural gas, Propane and LPG Gas solenoid valve normally closed solenoid that open automatically when the coil is powered and close automatically when there is no tension.  read more

Swing Check Valve from DN32 - 600 Flange connection :  ASME B16.5/ANSI Class 150, JIS B2220, 10K Temperature range : - 20 to 120 Deg C read more

Spare part for maintenance of Medenus gas pressure regulator, do contact us for more details. Spare part kits consists of: 1. Main diaphragm 2. Intermediate diaphragm 3. SSV membrane 4. Valve disc 5. SSV-valve disc 6. O-ring set read more

The MEDENUS gas pressure regulator type RS 251 ensures a constant outlet pressure - regardless of the primary (inlet) pressure - when the gas usage varies and ensures a quick pressure regulation when the flow rate abruptly changes. The inbuilt safety shut off valve ensures a safe shut off if the pressure is too high or too low. The gas pressure regulator RS 251 is suitable for gases in accordance with DVGW Code of Practice G260/262 and all other neutral and non-corrosive gases (others upon request).The RS 251 is available with flange connections DN25 to DN200 and working pressure up to 8,0 bar. All gas pressure regulators are certified by DVGW and CE. All regulators of the RS-series are with options like safety membrane, vent valve, remote release of SSV, noise reduction and many more available. For any details please look into our documentation or get in contact with us. read more

read more

read more