Flow Straighteners and Flow Conditioners General instruments manufacture flow conditioners and flow straighteners for flow meter, process and pump system applications which reduces the straight run requirement to just a few diameters. It eliminates the flow distortion effects of the elbow, pipe expansion or reductions, valves, dampeners, and other disrupters. Suitable for various media including Gas, Steam, Liquids, Slurries, Sludges, Hydrocarbons and more. General flow conditioners have an extremely low-pressure drop, resulting in significant energy cost savings. General flow straighteners/conditioners are available in straight pipe runs, a unique 90-degree elbow and insertion panel designs for virtually any pipe, tube or duct size.   Flow straighteners Flanged ends: A105, SS304, SS316, SS304L, SS316L, LF2, other on request. Pipe chamber holding the bundle of tubes : A106, Mild Steel, SS304, SS316, SS304L, SS316L, LF2, PP, PTFE and other on request Tube Bundle : A106, Mild Steel, SS304, SS316, SS304L, SS316L, LF2, PP, PTFE, Monel and other on request Dimensions : Based on a selection of tube thickness and no. of tubes within the pipe size on free length availability   Flow Conditioners Flanged ends : A105, SS304, SS316, SS304L, SS316L, LF2, PP, PTFE, other on request. Dimensions : Based on the selection of tube thickness and no. of tubes within the pipe size on free length availability No. of holes : on selection and sizing with dimensions as per engineering calculation   Condensate Pot General Instruments manufacture a complete range of condensate pots required for measurement of steam/vapor which condensates to the liquid state at the ambient temperature. These are used to cool down very high temperature liquids and to maintain a constant liquid head above the instrument. These can be installed in both horizontal and vertical position. Manufactured in standard sizes of 2”, 3” and 4” however based on client requirement other sizes can be designed. Condensate pots are available in various grades of Carbon steel, alloy steel and stainless steel. IBR form IIIC certification available.   Flow Straighteners & Flow Conditioner read more

Differential Pressure Gauges Types: Variety of models based on sensing elements such as diaphragm, bellow, Capsule, etc. are available. Bellow type Differential Pressure Gauges are available with 6” dial size and accuracy of +/-1% FSD as standard and static pressure of 100 Kg/cm2. Diaphragm type Differential Pressure Gauges models are available with 4” and 6” dial size with single and double diaphragm elements and accuracy of +/- 2% FSD standard and +/- 1.6% on request. Magnehelic Differential Pressure Gauges are available with dial size 4” and 6” dial size, minimum range 0 – 100mmwc and static pressure upto 100 Bar. Mag DP Gauge model is especially designed for pharma applications with very low ranges of 0 – 6 mmwc to 0 – 25 mmwc. Diaphragm Seals: Diaphragm Seals are available in various designs such as flush diaphragm seal, Sandwich type “I” section diaphragm seal, Capillary type diaphragm seal, etc. Pl. refer our catalogues for different models of DP Gauges designed based on combinations of Differential Pressure range, operating pressure and static pressure. Range: Differential Pressure Gauges designed for low DP range as 0 – 60mmwc and above various combinations of DP ranges and static pressure maximum upto 400 Kg/cm2 is available for industrial process applications. The latest IP-68 protection is offered as standard feature for all gauges. Wetted Parts: Based on different type of models wetted parts can be provided in SS316, SS316L, SS316 Ti, Monel, Hastelloy, Inconel, Incolloy, Titanium, Tantalum, Nickel, PTFE Coated / Lined / block etc. Accessories: Gauge Saver, Manifold Valve, pointer puller and fixture kit, etc. Special Features: Maxima pointer, NACE Compliance, Colour band, dual scale range, liquid filed case, O2 (oxygen cleaning), N2 (Nitrogen cleaning), blow out disc at back, vacuum protection, capillary extension, micrometer pointer and many other features. Unique design of external zero reset Knob for liquid filled Differential Pressure gauges wherein zero can be adjusted without opening the case and bezel and draining the liquid filling from case. This special feature is developed by GIC and essentially demanded by oil and gas / hydrocarbon industry onshore and offshore. Quality: certified as CE, ATEX, GOST –R, GOST Pattern approval, IBR certification, Type tested by BV, Calibration reports from NABL (National Accreditation Board for Testing & Calibration Laboratory) certified in-house calibration laboratory. Regular Inspection and testing by BV, DNV, TUV, Lloyds, ABS, Moody, EIL, CEIL, etc. Certificates: Certificate of conformance, Test and calibration certificate, IP Certification, Material test certificates, 3.1 MTC, 3.2 MTC, PMI, PWHT, IGC various practices, NACE-MR-01-75 & NACE-MR-0103, Hydrotest, etc. available.    Differential Pressure Gauges – Bellow Type  Differential Pressure Gauges – Diaphragm Type  Differential Pressure Gauges – High Static  Differential Pressure Gauges – Capsule Type  Differential Pressure Gauges – Diaphragm / Piston Type  Differential Pressure Gauges – Mag DP (Pharma Applications)  Flow indicator – Diff. Pressure Gauge with flow element assembly Diaphragm Seals    Sandwitch Type Diaphragm Seals  Flush Type Diaphragm Seals read more

PRESSURE GAUGES Pressure Gauge Types : Variety of models based on sensing elements such as Bourdon, diaphragm, Capsule, etc. are available as well as special gauges such as Absolute Pressure Gauges, Master / Test Gauges, Mud Gauges, Solid front Case, liquid (Glycerin / Silicon filled) gauges, Receiver gauges, hygiene / sanitary gauges, etc. are available. Diaphragm Seals: Diaphragm Seals are available in various designs such as flush diaphragm seal, Sandwich type “I” section diaphragm seal, Pan cake type diaphragm seal, in-line type diaphragm seal, jacketed type in-line diaphragm seal, extended type diaphragm seal, Capillary type diaphragm seal, etc. For high temperature applications diaphragm seal are provided with Silicon oil grade DC 200, DC 704, DC 705, DC 710 etc and based on specific request Fluorolube oil, glycerin, halocarbon oil, food grade vegetable oil is also provided. Range: Pressure Gauges designed from pressure range Vacuum (-) 1 to 3000 kg/cm2 ( higher ranges upon request). The latest IP-68 protection is offered as standard feature for all gauges. Wetted Parts: Available in Phosphorous Bronze, Brass, SS304, SS304L, SS316, SS316L, SS316 Ti, Monel, Hastelloy, Inconel, Incolloy, Titanium, Tantalum, Nickel, PTFE Coated / Lined / block etc. Accuracy: +/- 1% FSD (standard),+/- 0.5% FSD on request. Test / Master Pressure Gauges are available with accuracy of 0.25% FSD. Accessories: Gauge Saver, Snubber (Pulsation Dampener), Cooling Tower, Syphon, Gauge adaptor, Swiveling adaptor, Gauge Cock, Needle Valves, Manifold Valve, flushing ring, pointer puller and fixture kit, etc. are available. Special Features: Maxima pointer, NACE Compliance, Colour band, dual scale range, liquid filed case, O2 (oxygen cleaning), N2 (Nitrogen cleaning), Ammonia gauges, blow out disc at back, vacuum protection, capillary extension, micrometer pointer and many other features. Unique design of external zero reset Knob for liquid filled Pressure gauges wherein zero can be adjusted without opening the case and bezel and draining the liquid filling from case. This special feature is developed by GIC and essentially demanded by oil and gas / hydrocarbon industry onshore and offshore. Quality: certified as CE, ATEX, GOST –R, GOST Pattern approval, IBR certification, Type tested by BV, Calibration reports from NABL (National Accreditation Board for Testing & Calibration Laboratory) certified in-house calibration laboratory. Regular Inspection and testing by BV, DNV, TUV, Lloyds, ABS, Moody, EIL, CEIL, etc. Certificates: Certificate of conformance, Test and calibration certificate, IP Certification, Material test certificates, 3.1 MTC, 3.2 MTC, PMI, PWHT, IGC various practices, NACE-MR-01-75 & NACE-MR-0103, Hydrotest, etc. available. Pressure Gauges  Bourdon Sensing Pressure Gauge  Gauges with External Zero Adjustment  Safety Pattern Solid Front Pressure Gauges  Capsule Sensing Pressure Gauges  Diaphragm Sensing Pressure Gauge  Pressure Gauge with 250 mm dial  Pressure Gauges 40, 50, 63 mm Dial  Receiver Gauge  Absolute Pressure Gauge  Master / Test Pressure Gauge  Hygiene Gauges  MUD Gauges  Pressure Gauge with In-built Transmitter Diaphragm Seals (for PG / DPG)    Chemical / Diaphragm Seal Unit  Sandwich type Diaphragm Seal  Flush Diaphragm Seal  Pan Cake type Diaphragm Seal  In-Line Flow through type Diaph. Seal  Extended Diaphragm Seal Diaphragm Seal for Transmitter    Chemical / Diaphragm Seal Unit  Sandwich type Diaphragm Seal  Flush Diaphragm Seal  Pan Cake type Diaphragm Seal   Hygiene Diaph. Seal  Extended Diaphragm Seal  Threaded Flush Diaphragm Seal Accessories    Snubber  Pig tail Syphon  U Syphon  Gauge saver  Gauge Adaptor  Universal Adaptor or Gauge union  Gauge Cocks  Needle Valves  Two Valve Manifold  Three Valve Manifold  Five Valve Manifold  Cooling Tower  Flushing Rings  Pointer Puller & Fixer Kit  Conversion Chart read more

Bruciatori Industriali Santin’s MXS series is the world most flexible and reliable industrial burner. MXS burners provide an extraordinary performance in furnaces, ovens and dryers, paint finishing lines, textile and paper machines, coffee roasters, food ovens incinerators and grain dryers. Three sizes up to 2.000.000 Kcal/h. This series is available with cast iron or aluminium until 800.000 Kcal/h and stainless steel up to 2.000.000 Kcal/h. MXS is available in compact mode with blower or in WB version without blower.   COMPACT SYSTEM MXS is available in compact mode with gas /air train with blower and command panel with control unit. Applications: The MXS Burners is normally used for the following applications: Industrial processes Furnaces with air circulation Heat treatment furnaces Post combustors and post burners Forges Incinerators Foundries Drying ovens Cooking ovens Textile drying ovens Heating small ovens and ladles Farms Manufacturing textile industry Melting furnaces Painting ovens Roasting machines Industrial fryers Feature: Some features of MXS Burners: Two stages - Two-stages min / max - Off, on at reduced power, switched to full power Modulating Three stages LPG burners Natural gas burners - Industrial burners for natural gas at high or low pressure. Ventilated air burners For low-pressure natural gas or LPG Automatic and semiautomatic burners High power High temperature burners Turndown 1-40   Model Kcal/h LPG consumptions kg/h Methane consumptions m3/h MXS1-200 200.000 (232 KW) 16,6 23,5 MXS1-400 400.000 (465KW) 33,33 47,05 MXS2-500 500.000 (581 KW) 41,66 58,82 MXS2-800 800.000 (939 KW) 66,66 94,11 MXS3-1200 1.200.000 (1.395 KW) 100,00 141,17 MXS3-1600 1.600.000 (1.860 KW) 133,33 188,23 MXS3-2000 2.000.000 (2325KW) 166,66 235,29 Burners for foundries · Burners for forges · Burners for food-related applications · Burners for ceramic processing · Burners for textile industry · Burners for industrial applications · Burners for industrial furnaces · Burners for incinerators read more